Sqid_Id
String_32
Optional
The string identifier of the device, as it would appear on a plan.
StormWater / ADAC Version v5.0.1
ADAC
NonGPTSimple
Represents a WSUD point feature that is not a simple litter trap, such as a small sand filter, sediment pond, aquifer storage, infiltration measure or energy dissipater.
ADAC Versions
Attributes
Required and optional XML attributes
Construction
enum
Required
The construction method.
Accepted Values
ValueDescription
Prefabricated
Prefabricated
Insitu
Built or poured in-situ.
Manufacturer
String_64
Optional
The manufacturer if applicable.
ModelNumber
String_64
Optional
The model if applicable.
TreatmentMeasure
enum
Required
Treatment measures applicable to WSUD points that are neither simple nor complex Gross Pollutant Traps.
Accepted Values
ValueDescription
AquiferStorageTank
AquiferStorageTank
EnergyDissipater
An installation in a drainage line, usually of concrete or stone, designed to dissipate the kinetic energy of flowing stormwater, to minimise its potential for erosion and damage. Often placed immediately downstream of an endstructure, but may conceivably be anywhere needed in a drainage line.
FloatingBoom
FloatingBoom
InfiltrationPond
Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
InfiltrationTank
Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
RubblePit
A rubble pit designed to promote infiltration of untreated runoff to surrounding soils.
SandFilter
A sand filter is a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
SedimentForebay
A Sediment Forebay, usually associated with a WSUD area to intercept coarse sediment.
Function1
enum
Required
The first function of the WSUD point. Must be supplied.
Accepted Values
ValueDescription
SedimentCapture
SedimentCapture
SandFiltration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
AquiferStorage
AquiferStorage
EnergyDissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Function2
enum
Optional
The second function of the WSUD point, if applicable.
Accepted Values
ValueDescription
SedimentCapture
SedimentCapture
SandFiltration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
AquiferStorage
AquiferStorage
EnergyDissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Function3
enum
Optional
The third function of the device, if applicable.
Accepted Values
ValueDescription
SedimentCapture
SedimentCapture
SandFiltration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
AquiferStorage
AquiferStorage
EnergyDissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Length_mm
positiveInteger
Required
The length of the device.
Width_mm
positiveInteger
Optional
The width of the device.
MaintenanceCycle_mnths
positiveInteger
Optional
The minimum maintenance cycle in months. This is the revisit interval for maintenance or inspection, if applicable.
Rotation
Float_Direction
Optional
Rotation angle (cartesian - anti-clockwise 0 degrees = East)