Connection

SurfaceLevel_m float

Required

Surface level of this feature (in metres against the vertical datum).

InvertLevel_m float

Required

Invert level of this feature (in metres against the vertical datum).

Use enum

Required

The function of the house connection in the network.

Accepted Values

ValueDescription

House House Drain - standard sanitary drain conveying sewage only

Combined Combined House Drain - a sanitary drain conveying both sewage and storm water in a combined sewerage system

Diameter_mm positiveInteger

Required

The nominal diameter of the connection conduit.

Material enum

Required

The material of the connection conduit.

Accepted Values

ValueDescription

PVC-U PolyVinylChloride Unplasticised

PVC-M PolyVinylChloride Modified

PVC-O PolyVinylChloride Orientated

Cast Iron Cast Iron

RCP Steel Reinforced Concrete Pipe

DI Ductile Iron

FRC Fibre Reinforced Concrete

FRP Fibre Reinforced Plastic

PE Polyethylene

SWPP Structured Wall Polypropylene

AC Asbestos Cement (Existing Assets Only)

VC Vitrified Clay

M_1 A new material not yet in the Schema as agreed with the receiving entity

M_2 A new material not yet in the Schema as agreed with the receiving entity

Unknown Lid Material is unknown at time of data submission

Other Another material not included in the Schema

Class enum

Required

The pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.

Accepted Values

ValueDescription

SH Sewer Heavy

SEH Sewer Extra Heavy

SN4 SN4

SN6 SN6

SN8 SN8

SN10 SN10

SN12 SN12

SDR21 SDR21

PN8 PN8

PN12 PN12

PN12.5 PN12.5

PN16 PN16

PN18 PN18

PN20 PN20

PN35 PN35

X X

Y Y

Z Z

Unknown Material class unknown at time of data submission

Other Some other class not included in the standard Schema

Length_m Float_Positive_NonZero

Required

The material length in metres of the house connection branch conduit.

Type enum

Required

Physical configuration of connection.

Accepted Values

ValueDescription

Sloped Branch Connection to the reticulation sewer via an oblique junction serving a single property with no change in grade along the inclined property connection sewer with no vertical bends. Also known as Standard or Type A Property Connection.

Twin Sloped Branch Connection to the reticulation sewer via an oblique junction serving 2 properties with no change in grade along the inclined property connection sewer with no vertical bends. Also known as Standard or Twin or Dual Type A Property Connection

Ramp Riser Connection to the reticulation sewer via an oblique junction serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Property Connection.

Twin Ramp Riser Connection to the reticulation sewer via an oblique junction serving 2 properties where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Twin or Dual Type B Property Connection.

Jump Up Connection to the reticulation sewer via a vertical oblique junction serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known a Type C or Type D Property Connection.

Twin Jump Up Connection to the reticulation sewer via a vertical oblique junction serving 2-4 properties and incorporating a change in elevation of the property connection sewer via a vertical drop/jump up. Also known as Twin or Dual Vertical Riser, Type C or Type D Property Connection.

Sloped into MS Base Connection to the reticulation sewer into the base of a maintenance structure serving a single property with no change in grade along the property connection sewer and no vertical bends. Also known as Standard or Type A Connection

Twin Sloped into MS Base Connection to the reticulation sewer into the base of a maintenance structure serving 2 properties with no change in grade along the property connection sewer and no vertical bends. Also known as Standard or Type A Connection

Ramp into MS Base Connection to the reticulation sewer into the base of a maintenance structure serving a single property where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Connection

Twin Ramp into MS Base Connection to the reticulation sewer into the base of a maintenance structure serving 2 properties where the property connection sewer incorporates either or both a section laid at a steeper grade and vertical bends. Also known as Type B Connection

Drop into MS Base Connection to the reticulation sewer into the shaft of a maintenance shaft or via a drop entry into a maintenance hole and serving a single property. Also known as Vertical Riser, Type C or Type D Connection

Twin Drop into MS Base Connection to the reticulation sewer into the shaft of a maintenance shaft or via a drop entry into a maintenance hole and serving 2 properties. Also known as Vertical Riser, Type C or Type D Connection

Stub Obsolete designation for a connection into a Maintenance Hole, which is no longer used and only retained for backwards compatibility

Unknown Unknown type of property connection

Other Some other type of Connection not covered by the standard types

Chainage_m Float_Positive_Zero

Required

The distance in metres from the centre of the downstream manhole to the point of connection of the offshoot branch.

Offset_m Float_Positive_NonZero

Required

The distance measured square from the centre of the sewer main to the point of connection.

LineNumber String_32

Optional

The line identifier of the sewer main.

DSMHID String_32

Optional

Downstream manhole identifier.

IO_Distance_m Float_Positive_NonZero

Required

Distance from a point perpendicular to the inspection opening to the centre of the downstream manhole along the axis of the sewer main.

SO_Nearest_m Float_Positive_NonZero

Required

Perpendicular distance from the inspection opening to the nearest cadastral boundary.

SO_Other_m Float_Positive_NonZero

Required

Perpendicular distance from the inspection opening to the next nearest cadastral boundary.

Sediment_Trap boolean

Required

True indicates that the connection includes an inline sediment trap.

Attributes