Sqid_Id
String_32
Optional
The string identifier of the device, as it would appear on a plan.
StormWater / ADAC Version v6.0.0
NonGPTSimple
Represents a Water Sensitive Urban Design point feature
ADAC Versions
Attributes
Required and optional XML attributes
Construction
enum
Required
The construction method
Accepted Values
ValueDescription
Prefabricated
Prefabricated
Insitu
Built or poured in-situ
Manufacturer
String_64
Optional
The Manufacturer of the unit
ModelNumber
String_64
Optional
The standard code, model number or part number for the unit
TreatmentMeasure
enum
Required
The treatment measure employed
Accepted Values
ValueDescription
Aquifer Storage Tank
Aquifer Storage Tank
Energy Dissipater
An installation in a drainage line, usually of concrete or stone, designed to dissipate the kinetic energy of flowing stormwater, to minimise its potential for erosion and damage. Often placed immediately downstream of an endstructure, but may conceivably be anywhere needed in a drainage line.
Floating Boom
Foating Boom
Infiltration Pond
Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
Infiltration Tank
Infiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
Rubble Pit
A rubble pit designed to promote infiltration of untreated runoff to surrounding soils.
Sand Filter
A sand filter is a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Sediment Forebay
A Sediment Forebay, usually associated with a WSUD area to intercept coarse sediment.
Function1
enum
Required
The first function of the WSUD point. Must be supplied.
Accepted Values
ValueDescription
Sediment Capture
Sediment Capture
Sand Filtration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
Aquifer Storage
Aquifer Storage
Energy Dissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Function2
enum
Optional
The second function of the WSUD point, if applicable
Accepted Values
ValueDescription
Sediment Capture
Sediment Capture
Sand Filtration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
Aquifer Storage
Aquifer Storage
Energy Dissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Function3
enum
Optional
The third function of the device, if applicable
Accepted Values
ValueDescription
Sediment Capture
Sediment Capture
Sand Filtration
Sand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.
Infiltration
Infiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.
Aquifer Storage
Aquifer Storage
Energy Dissipation
The dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.
Length_mm
positiveInteger
Required
The length of the device
Width_mm
positiveInteger
Optional
The width of the device
MaintenanceCycle_mnths
positiveInteger
Optional
The minimum maintenance cycle in months. This is the revisit interval for maintenance or inspection, if applicable.
Rotation
Float_Direction
Optional
Rotation angle (cartesian - anti-clockwise 0 degrees = East)