Communication / ADAC Version v6.0.0

Pit

Represents a communication pit feature.

Geometry: geometry_point_singlepoint
ADAC
ADAC Versions
v4.1 v4.2 v5.0.1 v6.0.0 Introduced LATEST

Attributes

Required and optional XML attributes
Type enum
Required

The type of communication pit.

Accepted Values
ValueDescription
Tri Truff Circular 600 Tri Truff Circular 600.
Type 1 Type 1.
Type 2 Type 2.
Type 3 Type 3.
Type 4 Type 4.
Type 5 Type 5.
Type 6 Type 6.
Type 7 Type 7.
Type 8 Type 8.
Type 9 Type 9.
Type 66 Type 66.
Surface enum
Optional

The surface in which the pit is installed.

Accepted Values
ValueDescription
Bitumen Bitumen.
Concrete Concrete.
Grass Grass.
Material enum
Required

The pit material type eg: Plastic, Concrete.

Accepted Values
ValueDescription
Asbestos Cement Asbestos Cement.
Concrete Concrete.
Fibreglass Fibreglass.
Plastic Plastic.
Polymer Concrete Polymer Concrete.
LidMaterial enum
Required

The Lid material type eg: Plastic, Concrete.

Accepted Values
ValueDescription
Aluminium Aluminium.
Cast Iron Cast Iron.
Composite Plastic Composite Plastic.
Concrete Concrete.
Fibreglass Fibreglass.
Galvanised Mild Steel Galvanised Mild Steel (GMS).
Galvanised Mild Steel - In-Fill Galvanised Mild Steel (GMS) - In-Fill.
Polymer Concrete Polymer Concrete.
LidDesignation enum
Optional

Label on Lid.

Accepted Values
ValueDescription
Blank Blank.
Communications Communications.
Communications + Local Govt Name E.g. Communications - BCC.
Traffic Signals Traffic Signals.
LidLoadRating enum
Optional

Access cover and frames load rating as per AS3996.

Accepted Values
ValueDescription
Class A Extra Light - 10kN.
Class B Light - 80kN.
Class C Medium - 150kN.
Class D Heavy - 210kN.
KeyType enum
Optional

Key type used to open lid.

Accepted Values
ValueDescription
Allen Key Allen Key.
None None.
Padlock Padlock.
Smart Key Smart Key.
Size enum
Required

Represents the essential dimensions of the pit. Contains a choice of structures that pertain to different configurations.

RectangularDimensions of a rectangular pit.
Length_mm positiveInteger
Required

Length in millimetres.

Width_mm positiveInteger
Required

Width in millimetres.

Depth_m Float_Positive_NonZero
Required

The depth of the pit in metres.

SurfaceLevel_m float
Optional

Surface level of pit, measured at the centre of the pit lid (in metres against the vertical datum).