Complete Command Reference

1Find a command or macro

Select the product you are using then choose a row to open the full task guide. infrADAC ACAD and infrADAC BCAD use commands from the CAD command line or ribbon. infrADAC DCAD uses macros started from the infrADAC 12d toolbar.

Command names are case insensitive

You can type command names using upper or lower case letters. The reference shows the spelling used in the interface.

2Commands and macros

Icon	Command	Purpose
CMD	`ADACAbout`	Open the disclaimer and product acknowledgement.
CMD	`ADACAnnotate`	Create an Annotation enhancement. infrADAC DCAD attributes one existing native 12d Text element and uses remove and recreate for corrections.
CMD	`ADACAssetAttributes`	Set reusable Standard and Supplementary asset-specific prefills and optionally load or save a preset JSON.
CMD	`ADACAudit`	Audit the current project. infrADAC DCAD validates live geometry from infrADAC and native nested Adac records without transient audit highlights.
CMD	`ADACBulkBreakline`	Create Breakline assets from linework. infrADAC DCAD accepts open source strings through its compact selection panel, creates native assets and leaves the sources unchanged.
CMD	`ADACBulkContour`	Create Contour assets from constant elevation linework. infrADAC DCAD accepts source strings through a compact selection panel, creates native assets and leaves the sources unchanged.
CMD	`ADACBulkEasement`	Create Easement assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment for A through Z then AA onward.
CMD	`ADACBulkLot`	Create Lot assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment before creating native assets with numeric LotNo values.
CMD	`ADACBulkSpot`	Alias for Bulk Spot Height. infrADAC DCAD accepts one point native strings through the compact direct selection panel.
CMD	`ADACBulkSpotHeight`	Create Spot Height assets from points or blocks in infrADAC ACAD and infrADAC BCAD. infrADAC DCAD accepts one point source strings through its compact selection panel and creates native assets.
CMD	`ADACClean`	Run selected data-integrity, supporting-file, prefill and property block repairs.
CMD	`ADACClone`	Clone to points or compatible geometry in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one native source and places duplicates at repeated Plan X/Y points while preserving source Z.
CMD	`ADACCSV`	Import coordinate rows from supported CSV layouts and map each row to an asset type.
CMD	`ADACCUIx`	Install, reset or remove the CUIX ribbon for infrADAC ACAD and infrADAC BCAD. It is not supported or required in infrADAC DCAD.
CMD	`ADACDimension`	Create a Dimension enhancement. infrADAC DCAD attributes one existing native 12d Dimension element and uses remove and recreate for corrections.
CMD	`ADACDirectionClear`	Clear direction metadata and preview graphics.
CMD	`ADACDirectionSet`	Write direction metadata for selected line or surface assets.
CMD	`ADACDirectionView`	Preview selected line or surface direction without writing metadata.
CMD	`ADACDrawingExtents`	Set project drawing extents. In infrADAC DCAD this alias supports coordinates, native Plan corner picks and Plan view model extents.
CMD	`ADACEdit`	Edit selected assets in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one exact native element through its pre-launch output window pick.
CMD	`ADACErrorHide`	Hide selected or all transient audit highlights without deleting them.
CMD	`ADACErrorShow`	Show selected or all stored transient audit highlights.
CMD	`ADACErrorWipe`	Remove selected or all transient audit highlights.
CMD	`ADACExport`	Audit and export supported deliverables. infrADAC DCAD normalises native Adac data and sends live geometry without duplicates through the shared XML writer.
CMD	`ADACFind`	Search current design assets and focus the exact result. infrADAC DCAD identifies complete point, polyline and polygon UIDs in red and centres the existing Plan viewport without changing zoom.
CMD	`ADACFlowDirection`	View, set, compare or clear fall-direction metadata for selected linework.
CMD	`ADACGenerate`	Create or assign a compatible definition from existing geometry. infrADAC DCAD captures exact sources and uses Settings > New Object to choose separate native assets or attribution in place.
CMD	`ADACGlobalAttributes`	Set or edit category-based global attribute presets for later asset workflows.
CMD	`ADACGroundCreate`	Build and activate an infrADAC ground surface from supported source data.
CMD	`ADACGroundDefine`	Activate a stored or selected existing ground surface.
CMD	`ADACGroundReset`	Clear the active ground-surface definition and optionally delete generated geometry.
CMD	`ADACHelp`	Open the bundled product offline HTML manual in the dedicated infrADAC User Manual window.
CMD	`ADACHideAttributes`	Hide selected or all asset property blocks.
CMD	`ADACImport`	Audit and import an ADAC XML file. infrADAC DCAD creates native models, elements and world space Annotation Text.
CMD	`ADACLibrary`	Browse and edit profile based definitions, geometry, required status rules and the appearance controls supported by the active product.
CMD	`ADACLicence`	Review, refresh, check out, return or troubleshoot the active licence.
CMD	`ADACLog`	Open the latest infrADAC diagnostic log.
CMD	`ADACNew`	Run project, global and asset prefill initialisation. infrADAC DCAD performs the full preset sequence without DWG drawing changes.
CMD	`ADACProfile`	Edit the current profile metadata and supplementary contents; host drawing resources remain product-limited.
CMD	`ADACProject`	Edit project location, profile, standard, name and description.
CMD	`ADACProjectAttributes`	Set profile controlled project attributes. infrADAC DCAD persists them through native 12d project attributes.
CMD	`ADACRecreateAttributes`	Recreate property blocks for selected assets or groups.
CMD	`ADACRefreshAttributes`	Refresh selected or all property blocks from current XData.
CMD	`ADACSettings`	Open general, profile, licence, update and folder settings.
CMD	`ADACShowAttributes`	Show selected or all asset property blocks.
CMD	`ADACStandard`	Choose and create a standard asset from the active profile or base schema.
CMD	`ADACSupplementary`	Choose and create a supplementary asset from the active profile.
CMD	`ADACSupport`	Create a support ticket and optionally attach the latest log.
CMD	`ADACSurface`	Open the land and surface action menu.
CMD	`ADACUpdate`	Check software and entitled profile updates.
CMD	`ADACXData`	Inspect all registered XData on selected infrADAC assets.
CMD	`ExtractBlockAttributes`	Diagnostic helper for extracting block attributes inside a selected area.
CMD	`ExtractPolylineXData`	Diagnostic helper for checking infrADAC polyline XData inside a selected area.

Icon	Command	Purpose
CMD	`ADACAbout`	Open the disclaimer and product acknowledgement.
CMD	`ADACAnnotate`	Create an Annotation enhancement. infrADAC DCAD attributes one existing native 12d Text element and uses remove and recreate for corrections.
CMD	`ADACAssetAttributes`	Set reusable Standard and Supplementary asset-specific prefills and optionally load or save a preset JSON.
CMD	`ADACAudit`	Audit the current project. infrADAC DCAD validates live geometry from infrADAC and native nested Adac records without transient audit highlights.
CMD	`ADACBulkBreakline`	Create Breakline assets from linework. infrADAC DCAD accepts open source strings through its compact selection panel, creates native assets and leaves the sources unchanged.
CMD	`ADACBulkContour`	Create Contour assets from constant elevation linework. infrADAC DCAD accepts source strings through a compact selection panel, creates native assets and leaves the sources unchanged.
CMD	`ADACBulkEasement`	Create Easement assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment for A through Z then AA onward.
CMD	`ADACBulkLot`	Create Lot assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment before creating native assets with numeric LotNo values.
CMD	`ADACBulkSpot`	Alias for Bulk Spot Height. infrADAC DCAD accepts one point native strings through the compact direct selection panel.
CMD	`ADACBulkSpotHeight`	Create Spot Height assets from points or blocks in infrADAC ACAD and infrADAC BCAD. infrADAC DCAD accepts one point source strings through its compact selection panel and creates native assets.
CMD	`ADACClean`	Run selected data-integrity, supporting-file, prefill and property block repairs.
CMD	`ADACClone`	Clone to points or compatible geometry in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one native source and places duplicates at repeated Plan X/Y points while preserving source Z.
CMD	`ADACCSV`	Import coordinate rows from supported CSV layouts and map each row to an asset type.
CMD	`ADACCUIx`	Install, reset or remove the CUIX ribbon for infrADAC ACAD and infrADAC BCAD. It is not supported or required in infrADAC DCAD.
CMD	`ADACDimension`	Create a Dimension enhancement. infrADAC DCAD attributes one existing native 12d Dimension element and uses remove and recreate for corrections.
CMD	`ADACDirectionClear`	Clear direction metadata and preview graphics.
CMD	`ADACDirectionSet`	Write direction metadata for selected line or surface assets.
CMD	`ADACDirectionView`	Preview selected line or surface direction without writing metadata.
CMD	`ADACDrawingExtents`	Set project drawing extents. In infrADAC DCAD this alias supports coordinates, native Plan corner picks and Plan view model extents.
CMD	`ADACEdit`	Edit selected assets in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one exact native element through its pre-launch output window pick.
CMD	`ADACErrorHide`	Hide selected or all transient audit highlights without deleting them.
CMD	`ADACErrorShow`	Show selected or all stored transient audit highlights.
CMD	`ADACErrorWipe`	Remove selected or all transient audit highlights.
CMD	`ADACExport`	Audit and export supported deliverables. infrADAC DCAD normalises native Adac data and sends live geometry without duplicates through the shared XML writer.
CMD	`ADACFind`	Search current design assets and focus the exact result. infrADAC DCAD identifies complete point, polyline and polygon UIDs in red and centres the existing Plan viewport without changing zoom.
CMD	`ADACFlowDirection`	View, set, compare or clear fall-direction metadata for selected linework.
CMD	`ADACGenerate`	Create or assign a compatible definition from existing geometry. infrADAC DCAD captures exact sources and uses Settings > New Object to choose separate native assets or attribution in place.
CMD	`ADACGlobalAttributes`	Set or edit category-based global attribute presets for later asset workflows.
CMD	`ADACGroundCreate`	Build and activate an infrADAC ground surface from supported source data.
CMD	`ADACGroundDefine`	Activate a stored or selected existing ground surface.
CMD	`ADACGroundReset`	Clear the active ground-surface definition and optionally delete generated geometry.
CMD	`ADACHelp`	Open the bundled product offline HTML manual in the dedicated infrADAC User Manual window.
CMD	`ADACHideAttributes`	Hide selected or all asset property blocks.
CMD	`ADACImport`	Audit and import an ADAC XML file. infrADAC DCAD creates native models, elements and world space Annotation Text.
CMD	`ADACLibrary`	Browse and edit profile based definitions, geometry, required status rules and the appearance controls supported by the active product.
CMD	`ADACLicence`	Review, refresh, check out, return or troubleshoot the active licence.
CMD	`ADACLog`	Open the latest infrADAC diagnostic log.
CMD	`ADACNew`	Run project, global and asset prefill initialisation. infrADAC DCAD performs the full preset sequence without DWG drawing changes.
CMD	`ADACProfile`	Edit the current profile metadata and supplementary contents; host drawing resources remain product-limited.
CMD	`ADACProject`	Edit project location, profile, standard, name and description.
CMD	`ADACProjectAttributes`	Set profile controlled project attributes. infrADAC DCAD persists them through native 12d project attributes.
CMD	`ADACRecreateAttributes`	Recreate property blocks for selected assets or groups.
CMD	`ADACRefreshAttributes`	Refresh selected or all property blocks from current XData.
CMD	`ADACSettings`	Open general, profile, licence, update and folder settings.
CMD	`ADACShowAttributes`	Show selected or all asset property blocks.
CMD	`ADACStandard`	Choose and create a standard asset from the active profile or base schema.
CMD	`ADACSupplementary`	Choose and create a supplementary asset from the active profile.
CMD	`ADACSupport`	Create a support ticket and optionally attach the latest log.
CMD	`ADACSurface`	Open the land and surface action menu.
CMD	`ADACUpdate`	Check software and entitled profile updates.
CMD	`ADACXData`	Inspect all registered XData on selected infrADAC assets.
CMD	`ExtractBlockAttributes`	Diagnostic helper for extracting block attributes inside a selected area.
CMD	`ExtractPolylineXData`	Diagnostic helper for checking infrADAC polyline XData inside a selected area.

Icon	Macro	Purpose
4D	`ADACAbout`	Open the disclaimer and product acknowledgement.
4D	`ADACAnnotate`	Create an Annotation enhancement. infrADAC DCAD attributes one existing native 12d Text element and uses remove and recreate for corrections.
4D	`ADACAssetAttributes`	Set reusable Standard and Supplementary asset-specific prefills and optionally load or save a preset JSON.
4D	`ADACAudit`	Audit the current project. infrADAC DCAD validates live geometry from infrADAC and native nested Adac records without transient audit highlights.
4D	`ADACAuditReport`	Open the project audit workflow. infrADAC DCAD does not create transient error highlights.
4D	`ADACBulkBreakline`	Create Breakline assets from linework. infrADAC DCAD accepts open source strings through its compact selection panel, creates native assets and leaves the sources unchanged.
4D	`ADACBulkContour`	Create Contour assets from constant elevation linework. infrADAC DCAD accepts source strings through a compact selection panel, creates native assets and leaves the sources unchanged.
4D	`ADACBulkEasement`	Create Easement assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment for A through Z then AA onward.
4D	`ADACBulkLot`	Create Lot assets from closed areas. infrADAC DCAD uses a compact selection panel, editable starting and step values and red or green Plan assignment before creating native assets with numeric LotNo values.
4D	`ADACBulkSpot`	Alias for Bulk Spot Height. infrADAC DCAD accepts one point native strings through the compact direct selection panel.
4D	`ADACBulkSpotHeight`	Create Spot Height assets from points or blocks in infrADAC ACAD and infrADAC BCAD. infrADAC DCAD accepts one point source strings through its compact selection panel and creates native assets.
4D	`ADACClone`	Clone to points or compatible geometry in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one native source and places duplicates at repeated Plan X/Y points while preserving source Z.
4D	`ADACDimension`	Create a Dimension enhancement. infrADAC DCAD attributes one existing native 12d Dimension element and uses remove and recreate for corrections.
4D	`ADACDrawingConfig`	Set infrADAC DCAD project extents by coordinate entry, native Plan corner picks or the last active Plan view model extents.
4D	`ADACDrawingExtents`	Set project drawing extents. In infrADAC DCAD this alias supports coordinates, native Plan corner picks and Plan view model extents.
4D	`ADACEdit`	Edit selected assets in infrADAC ACAD or infrADAC BCAD. infrADAC DCAD captures one exact native element through its pre-launch output window pick.
4D	`ADACExport`	Audit and export supported deliverables. infrADAC DCAD normalises native Adac data and sends live geometry without duplicates through the shared XML writer.
4D	`ADACExportXML`	Audit and export project deliverables. infrADAC DCAD groups live native geometry once by ADACId before shared XML generation.
4D	`ADACFind`	Search current design assets and focus the exact result. infrADAC DCAD identifies complete point, polyline and polygon UIDs in red and centres the existing Plan viewport without changing zoom.
4D	`ADACGenerate`	Create or assign a compatible definition from existing geometry. infrADAC DCAD captures exact sources and uses Settings > New Object to choose separate native assets or attribution in place.
4D	`ADACGlobalAttributes`	Set or edit category-based global attribute presets for later asset workflows.
4D	`ADACHelp`	Open the bundled product offline HTML manual in the dedicated infrADAC User Manual window.
4D	`ADACImport`	Audit and import an ADAC XML file. infrADAC DCAD creates native models, elements and world space Annotation Text.
4D	`ADACImportXML`	Audit and import an ADAC XML file. infrADAC DCAD creates native models, elements and world space Annotation Text.
4D	`ADACLibrary`	Browse and edit profile based definitions, geometry, required status rules and the appearance controls supported by the active product.
4D	`ADACLicence`	Review, refresh, check out, return or troubleshoot the active licence.
4D	`ADACLog`	Open the latest infrADAC diagnostic log.
4D	`ADACNew`	Run project, global and asset prefill initialisation. infrADAC DCAD performs the full preset sequence without DWG drawing changes.
4D	`ADACProfile`	Edit the current profile metadata and supplementary contents; host drawing resources remain product-limited.
4D	`ADACProject`	Edit project location, profile, standard, name and description.
4D	`ADACProjectAttributes`	Set profile controlled project attributes. infrADAC DCAD persists them through native 12d project attributes.
4D	`ADACSettings`	Open general, profile, licence, update and folder settings.
4D	`ADACSpot`	Alias for Bulk Spot Height. Selects one point native strings and infers their elevation in infrADAC DCAD.
4D	`ADACSupport`	Create a support ticket and optionally attach the latest log.
4D	`ADACUpdate`	Check software and entitled profile updates.

3Selection behaviour

Product	How selection works
infrADAC ACAD	Edit, Clone, Generate and other model commands can use objects selected before the command starts.
infrADAC BCAD	Uses the same preselection pattern through BricsCAD selection APIs.
infrADAC DCAD	12d does not expose another option's active selection. Generate uses a prelaunch Single/Multi Source Box. Edit, Clone, Annotation and Dimension use a prelaunch output window pick. Bulk tools open a compact direct selection panel automatically. Left click each source and select Done. Clone placement accepts repeated Plan X/Y points while preserving source Z.

1Find a command or macro

2Commands and macros

3Selection behaviour

4Related guides