Skip to main content
WaterSupply / ADAC Version v6.0.0

Hydrant

Represents a water supply hydrant feature

Geometry: geometry_point_singlepoint
ADAC Versions
v4.1 Introduced v4.2 v5.0.1 v6.0.0 LATEST

Attributes

Required and optional XML attributes
Use enum
Required

The purpose of the hydrant in the network.

Accepted Values
ValueDescription
Spring Spring Hydrant.
Filling Point Hydrant (usually of spring type) with a metered standpipe semi-permanently in place.
Duckfoot End of line with bend at base of riser
Pillar Pillar Hydrant.
Diameter_mm positiveInteger
Required

The nominal bore size of the hydrant.

Rotation Float_Direction
Optional

Rotation angle (cartesian - anti-clockwise 0 degrees = East)

WaterQuality enum
Required

The quality of the water being delivered through the hydrant.

Accepted Values
ValueDescription
Drinking Water Drinking-quality (potable) water for normal mains supply by the municipal water service provider
Recycled Aplus Class A+ tertiary treated with reverse osmosis recycled water for supply via dual reticulation for permitted interior and exterior uses
Recycled A Class A tertiary treated recycled water for supply via dual reticulation for permitted exterior uses
Treated Effluent Treated Effluent to class B through class D for irrigation only
Rain Water Rain Water collected directly into the system for irrigation
Raw Water Untreated water from a watercourse or pond used to feed a water treatment plant or irrigation system
Ground Water Untreated water from bores used to feed a water treatment plant or irrigation system
Process Water Non-potable process water of some description
Other Pipe conveying some other kind of water (not recycled class B and below which is considered as treated sewage effluent)
Unknown Type of water carried by this pipe is unknown at time of submission